Лопнула пластмассовая деталь под бампером

[Lednik]

это ещё не всё



Remove the side bolts (D).




IMPORTANT: before removing the side part of the bumper,
protect the front wing and the bumper with masking tape.
Insert a tool (e.g., clip-removing pliers),
and press with the tool while pulling the bumper gently,




to release the four clips (E).





Remove the two clips (F). Partially remove the bumper.
Disconnect:
- the fog light supply connector (if fitted),
- the supply to the headlight washer jets (if fitted).
Remove the bumper (two people).